Wood & Specialty Finishes
Expert staining and specialty coatings that protect surfaces and elevate them to something lasting.
Done Right,
Every Time
Wood deserves better than a quick coat of polyurethane. Whether it's a staircase, a front door, built-in shelving, or a whole floor, the right stain applied the right way brings out grain, depth, and character that lasts decades. Paul has stained every species and every surface — oak, walnut, mahogany, pine, fiberglass doors made to read as wood, and everything between.
The specialty side goes further: commercial-grade epoxy systems for floors and woodwork, and powder coating for metal — the toughest, cleanest finish you can put on iron, steel, or aluminum.
Everything We Handle
-
Wood Staining — All Types
Custom color matching and hand application on any wood species, interior or exterior.
-
Fiberglass Stain Work
Fiberglass doors and surfaces stained to a convincing, durable wood-grain finish.
-
Epoxy Floors & Woodwork
Commercial-grade epoxy systems — garage floors, shop floors, counters, and coated woodwork.
-
Powder Coating — All Metals
Baked-on, chip-resistant color for gates, railings, furniture, and fixtures.
-
Sealing & Protective Coatings
Clear coats, penetrating sealers, and marine-grade finishes for high-wear surfaces.
-
Refinishing & Restoration
Stripping, sanding, and refinishing tired wood back to showpiece condition.
What It Looks Like
Done Properly
The Process
-
Species & Surface Review
Wood species, existing finish, and exposure determine the right stain system — there is no one-size answer.
-
Sample Boards
Stain colors are tested on the actual material so you approve the real result, not a brochure swatch.
-
Controlled Application
Stain, seal, and topcoats applied in dust-controlled conditions with full dry times respected.
-
Durability Check
Final inspection for coverage, sheen, and adhesion — built to be cleaned, used, and lived on.
Frequently Asked
Can you match an existing stain color?
Yes. Custom color matching on sample boards is part of every staining project — the new work blends with what's already in your home.
How durable is an epoxy floor?
A properly prepped commercial-grade epoxy floor resists hot tires, chemicals, and abrasion for many years — preparation of the concrete is what separates a lasting floor from a peeling one.
What can be powder coated?
Nearly any metal — gates, fences, railings, patio furniture, brackets, and fixtures. Powder coating is baked on for a finish far tougher than paint.
Can tired wood be refinished instead of replaced?
Usually, yes. Solid wood can be stripped, sanded, and refinished for a fraction of replacement cost — and it keeps character that new material can't match. You'll get an honest call on which route makes sense.
How long before I can use an epoxy floor?
Foot traffic in about 24 hours, vehicles in roughly 72, and full chemical resistance after about a week of cure. Rushing it is how coatings fail, so the schedule protects the finish.
Does powder coating come in colors?
Hundreds of them — gloss, satin, and matte, plus textures and metallics. Whatever matches your hardware, fence line, or trim palette.
Let's Make Something
Worth Looking At.
Get a detailed quote — no obligation, no pressure, just a real conversation about what you need and what it'll take.
Licensed & Insured · Residential & Commercial · Same-Week Response